Harsha Filters

Select Language


Follow Us :

Facebook Twitter Linked IN You Tube

Visitor No. :

Suction Strainer

We are engaged in offering a wide range of Suction Strainer to the clients. Suitable for installation in the suction ports of the pump or submerged in the reservoir and attached to the suction line leading to the pump, our range of Suction Strainer is used to protect the pump from large particles found in the reservoir. These types of Suction Strainers are usually considered as coarse mesh filters or even magnetic separators. As high differential pressure can cause pump failure, high-efficiency filters are not placed on the suction side.

Replaceable core filter-drier of Suction Strainer is used for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. Our Suction Strainer has unique internal hardware for hassle-free installation, powder coating paint finish on exterior, sturdy steel shells for long life, solid MS fitting, 100 mesh outlet screen interior & exterior body with special chemical treatments to prevent rusting.

Applications :
  • Petroleum-based hydraulic fluids
  • Phosphate esters
  • Water glycols
  • Coolants
  • Lubricating oils
  • Fuels and water in fluid reservoirs
  • Sumps and similar applications
  • Automobile
  • Molding and allied engineering industries


Flow Rate Suction strainers are available from a flow rate of 5 to 250 lpm.
Nominal Particle Rating Available from 10 microns to 150 microns filtration rating
Filter Media Stainless steel wire mesh and perforated steel core.
Sealant Epoxy based
Sizes Custom Build sizes are offered
Operating Conditions Filter can withstand temperature up to 120oC. Filter is washable or can be cleaned by applying air pressure and re used.